factory Outlets for Acoustic Expanded Metal - micro mesh expanded metal /Light Expanded Metal Sheet – Yunde
factory Outlets for Acoustic Expanded Metal - micro mesh expanded metal /Light Expanded Metal Sheet – Yunde Detail:
- Place of Origin:
-
Hebei, China
- Material:
-
STAINLESS STEEL WIRE
- Type:
-
Expanded Mesh
- Application:
-
Farm Fence
- Weave Style:
-
expanded
- Technique:
-
Perforated
- Model Number:
-
YND-E-M
- Brand Name:
-
YND
Thin low carbon steel plate.
Stainless steel plate.
Expanded metal:
Raised Mesh
SWD: Plus 1/4" minus 0" per foot of width
LWD: Plus 3/4 minus 0"
Flattened Mesh
SWD: Plus 1/4" minus 0" per foot of Width
LWD: Plus 3/4" minus 0"
Grating
SWD: Plus 1/4" minus 0" per foot of width
Camber
Measured by placing a straight edge along the concave side of the sheet parallel to the LWD, touching both ends. The maximum distance from the edge expanded metal to the straight edge is the camber
Raised Mesh
1/16" per foot of length
Flattened Mesh
3/32" per foot of length
Out of Square
Expanded metal sheets are not perfectly square as manufactured. Stock size sheets and machine run non standard size sheets will be produced to the following tolerances
SWD: 1/16" per foot of Width
LWD: 1/16" per foot of length
Sheets That have to be perfectly square must go through a secondary process of shearing.
Flattening
Flattened sheet thickness shall be plus or minus 10% of published thickness or strand thickness
Non Standard Sheets
Machine Run
Where tolerances permit, machine run non standard sheet sizes are manufactured to the same tolerances as stock size sheets
Random Shearing
Stock size sheets can be random sheared when a closer tolerance is required. This is a secondary process.
Bond Shearing
Bond shearing can sometimes be performed, with limitations. This is a secondary process.
Finishes:
Cleaning – Carbon expanded metal is lightly oiled and should be cleaned before finishing. The most common cleaning method is an acid or solvent bath with a water rinse. For aluminum, use a non-etching chemical or detergent, then rinse and dry thoroughly.
Anodizing – A surface treatment for aluminum where an oxide coating is added electrochemically to the metal. For interior abrasion resistance a .0025" coating is necessary. Medium abrasion applications for interior or maintained exteriors need a .0004" coating. Use a .0008" coating for exteriors.
Porcelain Enamel – Porcelain enamels can be readily applied to expanded metal. Forming, cutting, welding and drilling should be done before applying the finish. All surfaces should be covered.
Painting, Lacquering, Plastic Coating – Be sure the coating used has good surface tension or wetting properties and viscosity to prevent any pullback from metal edges and webbing-in of diamonds.
Galvanizing – Hot dip galvanizing is primarily a protective coating and may have a rough uneven appearance. Where smooth finish is required, other coatings and protective methods should be used. Certain small expanded metal styles do not lend themselves to hot dip galvanizing because the openings become filled with zinc. Warping or distortion may occur during hot dip galvanizing due to the heat of the molten zinc.For these reasons patterns lighter than 18 gauge, with openings of 1/2" or less or any patterns with a weight per square foot of 0.45 lbs or less are not recommended to be galvanized.
Usage:mainly applied as platform and stair treads for constructions,vessels bridges and boilers.They are also used as reinforcement foe instructions and concrete pouring ,radiator grills on all type of vehicles and air-compressors and so on.
Packaging: 1.pallet 2.wooden box
Delivery: 7-15 days
Anping Yunde Metal Co., Ltd. has established itself as the premier option of bar grating, expanded metal, perforated metal, and specialty metal products in China. Dedicated to unparalleled service, Yunde Metal is providing more than 30 kinds of expanded metal, perforated metal and a number of external products. Our markets are at home and abroad, including Japan, Germany, Britain, Australia, the United States and so on.
Trade & Market Main Markets: Central America
Africa
Eastern Europe
Mid East
Northern Europe
Western Europe
North America
Total Annual Sales Volume: US$10 Million – US$50 Million
Export Percentage: 71% – 80%
Factory Information Factory Size (Sq.meters): 30,000-50,000 square meters
Factory Location: Wire mesh industrial zone ,anping china
Number of Production Lines: 8
Number of R&D Staff: 11 – 20 People
Number of QC Staff: 31 – 40 People
Management Certification: ISO9001
We cooperate with many countries, such as Brazil, Russia, Poland, Australia
Hope you can contact and I will offer you the best price , will do my best to serve you !
Why do you make business with our company?
Manufacturer
Superior quality & Good service
Fast delivery & Competitive price
ISO9001:2008
Special size is available
Welcome customers’ inquiry!
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as theory of "quality the basic, have faith in the initial and administration the advanced" for factory Outlets for Acoustic Expanded Metal - micro mesh expanded metal /Light Expanded Metal Sheet – Yunde, The product will supply to all over the world, such as: Korea, Marseille, Detroit, If any item be of interest to you, please let us know. We will try our best to satisfy your requirements with high quality products, the best prices and prompt delivery. Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.
By Gladys from Provence - 2017.05.02 18:28
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Lauren from Benin - 2017.04.18 16:45